WIP Passive

The WIP Passive mimics a standard Passive by locking into the Active unit. Incorporating a static sprayball coupled to a wash fluid source, the WIP Passive features an o-ring on the outer perimeter to create a liquid seal between the Active and Passive units. The wash fluid drains through the open valve to the process below.

Clean in place passive
Clean in place illustration

The standard design is for use in the upright orientation. When the Active is in the inverted position, a WIP Passive with drain point can be utilised to allow the wash fluid to drain safely from the valve.

  • Local washing of the Active unit inner product contact and sealing surfaces.
  • 316L or HPDE materials of construction.
Clean in place passive with drain
Email to a friend Print this page
Find your local representative